Adidas Overgrips x3

You need the best to give your all on the court, that's why you should use the new Overgrip Adidas.

Its design will provide you with great grip and incredible control of the Racket, and it will also absorb sweat to prevent your hands from staying wet and slipping from your hand.

Installation Instructions

1. Prepare the Grip: Remove the clear plastic film from the front of the overgrip. Locate the tapered end (the end with the small adhesive tab).

2. The Starting Point: Place the adhesive tab at the very bottom (butt cap) of the racket handle. Hold it firmly with your thumb.

3. The First Wrap: Rotate the racket slowly, making one full horizontal wrap around the base of the handle to lock the grip in place.

4. The Spiral Descent: Begin wrapping upward toward the racket head. Overlap each layer by about 2mm to 3mm (roughly 1/8 inch). Keep the grip tight and under constant tension to avoid wrinkles.

5. Finishing the Top: Once you reach the top of the handle (the neck), use scissors to cut the grip at an angle so it finishes in a straight line.

6. Secure: Wrap the provided Wilson finishing tape around the top edge to seal the grip.